Weather Proof Outdoor

Weather Proof – Florescent Units

Description

The body is realized through injection printing inself – extinguishing (V2), unbreakable polycarbonate 7035 RAL grey colour, internally to obtain a high mechanical resistance . The fixing pins of the wiring plate is in self-extinguishing (V2), unbreakable ploycarbonate it turns by 90^o for a quick, safe hooking/unhooking of the plate. Closing clips which are impossible to lose in  stainless steel for opening and hooking the diffuser. Anti – ageing gasket in expanded polyurethane directly injected in its place. Diffuser printed by injection in transparent, self – extinguishing (V2 ) unbreakable polycarbonte stabilized to U.V. rays (to avoid  its turning yellow) with prisms inside to obtain a homogeneous diffusion and a high light output. Reflecting plate with the  electrical accessories in Galvanized steel, previously painted in white with Polyester powders, stavilized to U.V. rays, fastened via anti- fall nylon strings to body. Normal wiring factor corrected for 230V – 50 Hz Supply, terminal block in polycarbonate, 2poles +earth 2.5 mm2 rigid wiring in compliance with the IEC standards. (section 0.75 mm2).G 131ampholder in polycarbonate. The fixture is mass produced, in compliance with the actual E.C. regulations. CEL 34-21 (EN 60598-1) CEL 34-21 (EN 90598-2-1) Protection degree IP 65 Led Lamps can be applied upon your request. Closing stainless steel clip for blocking, and fast – opening the diffuser. Weather proof fixture for fluorescent lamps, having a very high degree of protection against water and dust (IP 65) in self-extinguishing (V2) polycarbonate. It is highly resistant to  corrosive substances and suited to damp, aggressive environment.